The ROTAL system is an innovative system consisting of a spinning impeller located in the centre of the distribution head, that promotes a more uniform distribution of the seed to the seeding rows even in hilly areas thus reducing by a 50% factor the error in distribution homogeneity.

N.B: Only available for cereal configuration.

ISOBUS is a STANDARD communication system to link the controls system of the tractor and the implement.

Our ISOBUS implements are easily connected electronically to the tractor. Through the one only ISOBUS cable all information needed for the correct functioning of our seed drill, are transferred there including the power source.

The controlling monitor of the seed drill can be the same of the tractor, with the same functions (UT function). This means less
purchasing cost, ease of use for the user, and more effi cient utilization of the room available in the tractor cabin. On request Alpego can provide 2 different monitors , both UT (Universal Terminal) and therefore useable with other ISOBUS implements.

Thanks to ISOBUS it is easily possible to use advanced functions like: variable distribution, parallel assisted drive, automatic closure of seeding sections and other “precision farming” solutions.

Reduced overall dimensions. Maximum width 2.50 meters.

Distribution head made of stainless steel.
The lid can be opened to make cleaning easier.
Set-up for the electric device for the reduced-size drilling (APD)

Big hopper extending on request.

Highest use flexibility of the volumetric metering unit: suitable for small and large seeds and fertilizer (from 1.8 to 350 kg/ hectare) with a few simple adjustments.

Built in wear-resistant stainless-steel materials for maximum reliability.

Suited also for processed seeds or fertilizers.

• Improved drill calibration, easy recovery of the product during the calibration process, thanks to the swinging flap.
• Speed-variation through gears
• Volumetric adjustment for large and fine seeds
• Quick access, even to the lower part of the venturi for better cleaning
• Large opening for the clearing of the metering unit. This is particularly useful when preparing the machines for storage
• Quick rear discharge of the seeds which can be shut even with a full hopper
• Practical bag and digital dynamometer for weighing during the calibration process

• Low power consumption Hydraulic fan, 25l/min at 190 bar
• Stainless steel INOX front hopper with moveable bulkhead to allow two different confi gurations: ½ to ½ or 1/3 to 2/3.
• Capacity 2,300 liters
• 2nd category front 3 point hitch
• Headlights, working led lights and reflectors
• Frontal folding loading platform
• Ballast holder, Can hold up to 600 kg
• Double INOX volumetric metering unit both for big and fi ne seeds
• Double front/rear connecting pipes Ø140 mm with adjustable holder for electric cables
• Dynamometer and sowing test bag
• Adjustable double level sensor

Auto-steering wheels. It is possible to install 4 compacting steering wheels Ø760mm.

TOUCH multifunction computer:

• 8” high resolution Touch screen display (800 x 600 TFT)
• USB port for data transfer
• Serial port RS232
• Cam port
• CAN-BUS connector
• Functions can be expanded with several available Apps, such as the Task Control (TC) or the parallel drive

DIGIT multifunction computer:

• 5.6” display
• USB port for data transfer
• Serial port RS232
• Cam port
• CAN-BUS connector
• Functions can be expanded with several available Apps, such as the Task Control (TC) or the parallel drive

It is possible to install ballasts up to 600kg.

Extended side plates for vineyards.

Central device for the control of the Tramline with shut-off valve.

It makes it possible to use all the cycles foreseen by the most popular weed-controlling and pulverization systems.

The following harrow is a device at the rear of the coulter ant it consists of a rake which cover up the drilled seeds when going over them.

The pre-emergence weeding discs mark the gauge of the wheel track combined with the tramline system.

The row-marking disc is a device which marks a reference line in the ground in order to make the drilling operation easier.

The small rubber wheel for depth control is a device which makes it possible to adjust the depth of each drilling coulter disc.

The shut-off of the hydraulic drill bar makes it possible to lift – and therefore – shut off the drill bar.