RF9
KEY FEATURES
- Tandem axle with 3 positions for variable draw-bar loading
- Manual feed rate control
- Ladder, mudguards/walkways and LED tail lights fitted
- Double chassis ready for scales
- High tensile floor shaft
- Priority belt speed control
- Stainless steel sides for corrosion and wear resistance
- Mesh front screen and back gate for good visibility
- Self-releasing back gate – opens automatically when bulk unloading
- Central greasing system for difficult-to-access bearings
- Cast iron bearings for long life
- 35mm treated T&G pine floor for extra durability

OPTIONAL EXTRAS
- Forage Wagon Wheel Options
There are many types of tyre options available. They all have various tread patterns and ground pressure properties to allow them to continue working in difficult conditions.
Below are sizes and types usually fitted to Forage Wagons.
- A. 11.5/80 x 15.3 AW (884h x 305w) tandem unbraked axle
- B. 11.5/80 x 15.3 TR (884h x 305w) tandem unbraked axle
- C. 400/60 x 15.5 TR, single unbraked axle
- D. 400/60 x 15.5 TR, tandem unbraked axle
- E. 15.0/70 x 18AW single unbraked axle
- F. 400R x 22.5 single unbraked axle
- G. 500/45 x 22.5 single unbraked axle
- H. 500/60 x 22.5 single unbraked axle
- Hydraulic Brakes
Hydraulic brakes provide operator safety and allow machine operation in difficult terrain.
Hydraulic brakes are available for most machines. On tandem axles, brakes are fitted to the front hubs only. If necessary, 4-wheel braking is available. The drum brakes work off external tractor hydraulics and have an adjustable relief valve and hoses included in the kit.
Braking systems are also available for tractors fitted with factory braking circuits that then operate when the brake pedal is depressed.
- Wireless Scales
Wireless weighing technology
Wireless technology is used to relay wagon data from the controller on the wagon to the control unit mounted on the tractor. Designed and manufactured specifically for forage wagons, this system integrates scales and feeding. Powerfully capable, yet simple to use, the controller has large buttons and an easy-to-read back-lit display. The control unit allows the operator to constantly monitor weight changes, all from the tractor seat.
Loading the wagon becomes more accurate. With the digital display mounted in the cab, sunlight or bad weather won’t be a problem anymore. Each load can be monitored and guesswork reduced.
- Option 1. Upgrade to wireless scales with manual floor control
Loading the wagon becomes more accurate. With the digital display mounted in the cab, sunlight or bad weather won’t be a problem anymore. Each load can be monitored and guesswork reduced. Feed rate is still controlled by manually altering the control on the wagon. - Option 2. Upgrade to wireless control from manual control
This can be added to Option 1 Scales or fitted by itself to give total control over the feed-out rate. Great if you are feeding bales. - Option 3. Add wheel sensor for ground speed compensation
Paddock feeding is easier too. Undulating terrain is now compensated for by automatically adjusting the feed rate while you drive. If you speed up, so does the machine. If option 4 is also fitted, this gives the operator all the advantages of Option 5 – Full Automatic Control. - Option 4. Upgrade to wireless scales with floor control
Loading the wagon becomes more accurate. With the digital display mounted in the cab, sunlight or bad weather won’t be a problem anymore. Each load can be monitored and guesswork reduced.Set a feed weight limit. The machine will feed out the amount you’ve entered then sound a beeper and stop the floor movement.Stop, start and adjust the discharge rate when needed, all while on the move, from the tractor seat.
- Option 5. Upgrade to wireless scales with full automatic control
This combines options 3 and 4. The feed pad now becomes simple maths rather than complicated guesswork. Enter information such as your overall feed pad length and how much you want to feed. The machine does the rest by dividing how much you want to feed over the length of the bins. No more unequal feeding and hungry cows.
- Option 1. Upgrade to wireless scales with manual floor control
- Sidelift
No waste with this feature.
The optional ‘sidelift’ feature uses hydraulics to raise and move the wagon body to the side allowing accurate delivery into feed troughs or bins without damage to the wagon, tractor or the bins. It is available on RF9, RF11 and RF13 models only.
At full height, the delivery belt is 1.2m from the ground and extends a maximum 0.7m past the tyres, allowing virtually waste-free delivery into feed bins up to 1.0m high. When the machine is lowered, it has the same lower centre of gravity and loading height as a standard model.
One double-acting hydraulic bank is all that is required to operate this feature.
The conveyor autoshift feature may also be of interest to you.
- Raising Blocks
Get extra height easily.
Raising blocks give extra clearance when towing a wagon over a silage stack or feeding into bins. These bolt between the axle and the machine and are available in 100mm or 150mm sizes. A secondary option of extra height is required for feeding into bins. A Quick Hitch on the tractor is also required.
- Conveyor Autoshift
Move the conveyor bed in and out with this hydraulically powered kit.
Moving the cross conveyor bed out by 200-250mm will place feed in your bins better, saves tyres and damage to bins by not having to drive as close. It requires one set of double-acting hydraulic outlets.
- 900mm Chain & Slat Conveyor
In lieu of 900mm belt.
Great if feeding really light product or a lot of square bales.
- Larger Opening on Cross Conveyor
Suits bales.
This option increases the size of the outlet for the cross conveyor. Better when delivering high volumes and square bales.
- Cross Conveyor Extension 900mm long
For feeding into bins when a side lift wagon cannot be used. Requires a double-acting hydraulic remote service.
- Other
Other Optional Extras:
- Sprung axles
- Sprung steering axle
- Extra RF Wireless Display Monitor
- Extra RF Cradle & Wiring Loom
- K80 ball hitch
- Silage cage complete with hydraulic rear door
SPECIFICATIONS
- RF 9 SPECIFICATIONS
RF 9 SPECIFICATIONS Model RF9 Overall Length 6.075m Overall Width 2.530m Overall Height 2.610m Loading Height 2.200m Bin Length 3.800m Bin Height 1.230m Bin Width 2.050m Tare Weight 2470kg Tare Weight (Sidelift Model) 2920kg Cubic Capacity 9.0m3 Conveyor Belt Width 900mm No. of Floor Chains 2 Load Cells 4x 5000kg Jack Type 80mm screw Axle Type Tandem Axle Size 60mm (6 stud) Wheels 11.5/80 x 15.3
Gendore
- MACHINERY
- NEW MACHINERY
- USED MACHINERY
- SPECIALS
- FINANCE
- SERVICING
- BOOK A SERVICE
- CALL 1800 436 3673
- PARTS
- CONTACT US
- 1800 436 3673
- DIRECTIONS