SL300X

The new SL300X bale unroller, a little brother to the SL360X, replaces our popular SL350 bale feeder. Born out of necessity, bred with Hustler DNA, the new SL300X is 3-point-linkage and loader ready, but you’ll need to pull a rope to disconnect. It has the toughest chain/bar setup on the market, and covered shafts just like its big brother.

4 KEY BENEFITS

  1. 3 point linkage and loader ready, utilising a new headstock design with bolt on brackets, you get to choose if you want it mounted on the front or rear or a tractor or loader, and it can be offset to allow more tyre clearance when feeding into bunks or troughs.
  2. Toughest bars and chain on the market is bullet-proof and lasts the entire life span of the round bale feeder. Super strong roller chains with the combined strength of 24,000lbs, with tough 40mm x 40mm zinc-plated bars. Bars are bolted to the chain, a stronger and more easily replaceable system.
  3. Tough new Thermoform fully enclosed polyethylene floor with covered drive shafts which eliminate wrapping. It’s non-corrosive, impervious to UV, slippery and shock resistant.
  4. Low maintenance. Just 4 grease nipples is all it takes to maintain the SL300X round bale feeder, that’s because instead of bushes we use longer lasting fully sealed block bearings, mounted outboard to keep them clean and free of damage from acidic silages juices.
*Always confirm model specifications & pricing with a Gendore Product & Sales Specialist
SL300X

FEATURES

  • Strongest Bars

    The sl300x round bale unroller has floor bars that are 4-5 times stronger torsionally than angle type bars of the same size. We’ve bolted them to the chain which is stronger and for different bale types, blank bars or bars with more aggressive teeth are available and can simply be bolted on in a matter of minutes without breaking the chain.

  • Covered Shafts

    New Thermoform floor covers the driveshaft’s which eliminates any possibility of feed wrapping around the shafts or jamming.

  • Enclosed Sprockets

    Our 6 tooth sprockets are made from Bisalloy (the same material used in a bulldozer blade) so they last forever. With smaller diameter sprockets less torque is required to drive the chains, giving more drive power for tough bales. Designed so it is impossible for the chain to jump off the sprockets, this saves you downtime in the field.

  • Toughest Chain

    Toughest chain on the market. Zinc plated chains rated to 24,000 lbs with the larger diameter rollers and pins make our chain drive system almost twice as strong as our competitors. And the greater surface on each roller pin increases chain life because they can’t stretch or snake.

  • Thermoform Floor

    The new single piece fully enclosed floor reduces feed waste and will never corrode. Being polyethylene it is slippery with 30% less drag compared to steel which makes feeding sticky silage or wet bales easy.

  • Ultra-low Cradle

    Our ultra-low cradle design with removable fences makes for easy loading should you not have much lift height on your tractors hitch. The longer spears also make loading easier, by reducing sag.

    SPECIFICATIONS

    • SL300X SPECIFICATIONS

      Bale size round:4’ X 4’ – 6’ X 5’
      Bale size square:requires optional side bars
      Bale weight:up to 1250kg
      Unit weight:480kg
      Capacity:1 bale
      Hydraulics required:1 X double-acting, 30-60 litres/min, 2250-3000 psi
      Loading:Self-loading
      Size (L x W x H):2071 x 2055 x 1051mm
      Chains:24,000lbs load rated roller chains

    OPTIONAL EXTRAS

    • Side Bar Kit

      Makes feeding badly mis-shapen round bales or even triangle bales a pleasure.

    • Sideshift

      The bolt on lower hitch mounts allows for the feeder to be off-set by 250mm in either direction, another unique feature that allows operators to distribute the feed closer to the head-bails and stock in barns eliminating double handling of the feed saving your time. The off-set feature works for both 3 point linkage and most loader mounts.

    • Hydraulic Toplink

      Make it easy with on-the-fly toplink adjustment from the comfort of the tractor seat.


      •   New Holland
      •   New Holland Construction
      •   Hustler Equipment
      •   Giltrap Equipment
      •   Zago Equipment
      •   Alpego Equipment
      •   Kverneland Taarup Equipment
      •   Vicon
      •   McHale
      •   BA Group
      •   Erth Engineering
      •   Taege
      •   Fleming
      •   Keltec
      •   Karcher
      •   Pottinger
      •   Gamberini
      •   HW Industries